Compatible Systems MicroRouter 900i Manuel d'utilisateur télécharger pdf (Page 5)

Contents - 5Microrouter CNC Machine User's Manual

Warranty Disclaimer.

The Warranty on your Microrouter CNC machine will be invalidated if any modifications,

additional ancillary equipment is fitted, or any adjustments made to the controlling devices

without prior notification from Denford Limited. Please refer to the information held in your

separate Warranty pack, for specific details.

Do not carry out any portable appliance testing (PAT) on any of the supplied equipment.

Maintenance Disclaimer.

Always obtain permission from the person responsible for machinery in your establishment,

before accessing the electrical control panel or Microrouter CNC machine casings to carry

out any maintenance work. All work must be carried out by personnel suitably qualified for

each maintenance task, to avoid damage to both the machine systems and the

maintenance personnel. Denford Limited cannot accept responsibility for any damage

and/or loss that may occur through incorrect maintenance of your Microrouter CNC

machine.

Foreseen Use of Machine.

Your Microrouter CNC machine is designed for routing hard and soft woods, certain

ceramics and plastics. In each case, the appropriate tooling, speeds and feeds should be

used as recommended by the material supplier. Your Microrouter CNC machine is not

intended for use with any ferrous or metallic materials.

Facility is provided for dust extraction. Always use the machine coupled to a vacuum

system.

Do not attempt to use your Microrouter CNC machine for manual operations.

Do not remove the router head and attempt to use it independently of the machine.

If you have any doubts and/or questions regarding the specification, servicing, or features of

your machine, please contact Denford Customer Services.

Denford Limited reserves the right to change the specification and/or operating features

regarding this CNC machine without notice or documentation.

Warning Notices

1 2 3 4 5 6 7 8 9 10 ... 93 94

Pas de commentaire

Compatible Systems MicroRouter 900i Manuel d'utilisateur Page 5