Compatible Systems MicroRouter 900i Manuel d'utilisateur télécharger pdf (Page 13)

Section 2 - Safety Features - 13Microrouter CNC Machine User's Manual

2: Safety Features - Interlock Guard Switch

An override facility is provided on the interlock

guard switch, allowing temporary removal of

the guard lock feature.

1) Using a flat blade, lift and remove the

circular black plastic blanking plug.

2) Using a small flat or crosshead

screwdriver, loosen the manual override

locking screw until the circular black plastic

lock screw can be turned.

3) Using a 3mm allen key, turn the circular

black plastic lock screw one quarter turn to

switch off the guard lock feature. If in

doubt refer to the lock/unlock symbols

embossed on the casing surface.

4) If necessary, tighten the manual override

locking screw slightly, then replace the

cover.

5) If you need to leave the machine, post a

warning note on the machine informing

users that the safety guard door lock is not

operating.

Lock release feature

hidden under circular

black plastic cover.

1) Remove cover.

2) Loosen the

manual override

locking screw.

locked

marker

unlocked

marker

unlocked

marker

triangular

lock screw

position

marker

3) Turn the

circular black

plastic lock screw

one quarter turn.

Danger of serious injury!

Do not let unauthorised personnel use the

machine when the guard lock feature is

disabled. Ensure the guard lock feature is

switched back on as soon as possible.

Warning

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 93 94

Commentaires sur ces manuels

Pas de commentaire

Compatible Systems MicroRouter 900i Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Compatible Systems MicroRouter 900i