Compatible-systems 5.4 Manuel d'utilisateur télécharger pdf (Page 233)

Chapter 14 - General 227

To access this dialog box, select Global/System Configuration from the

Device View.

> Device Name

This is the name which is used to advertise this device on both AppleTalk and

IPX networks. Thus, it is the name CompatiView displays in the Open -

Device screen (accessed from the File menu).

> Password

This is the main password used to access the device from CompatiView and

from the command line (either Telnet or auxiliary port operation). This login

level will allow a user to display tables and statistics, but does not permit a

user to view or make any changes to the configuration.

v Note: If you lose the password for a Compatible Systems device, you can

enable the default letmein password for five minutes by setting the switch

marked “Test” or “Mode” on the back of the device to 9 and restarting the

device. Make sure you set the switch back to 0 after you have set a new pass-

word into the device.

> Confirm Password

This box is used to confirm the entered Password.

> Enable Password

This password will enable supervisor mode for viewing or making changes to

a device’s configuration. If no Enable Password is created, then the Pass-

word will be used.

> Confirm Enable Password

This box is used to confirm the entered Enable Password.

1 2 ... 228 229 230 231 232 233 234 235 236 237 238 ... 312 313

Pas de commentaire

Compatible-systems 5.4 Manuel d'utilisateur Page 233