Compatible-systems 5.4 Manuel d'utilisateur télécharger pdf (Page 179)

Chapter 10 - WAN Link Protocols 173

The number of echo packets sent, and the number of responses, are counted.

If the conditions set in the Drop Link When... (discussed below) fields are

met, the link is dropped.

• If checked, echo packets will be regularly sent, and line quality moni-

tored.

Frequency in Seconds (Echo Packets)

This parameter determines how often an echo packet will be sent to the other

end. The value must be in the range of 1 to 32.

Drop Link When

These parameters set the size of the echo sequence that will be tracked, and

the number of packets that must be lost out of a sequence before the link will

be dropped. The values must be in the range of 1 to 32.

LCP Options Configuration Dialog Box

You can access the LCP Options Configuration Dialog Box by selecting On

Demand PPP Link or Dedicated PPP Link from the Link Type pulldown

in the Link Configuration: WAN Dialog Box (under WAN/Link Configura-

tion), and then clicking on the PPP Options button at the bottom of the dialog

box, and then clicking on the LCP Options button at the bottom of the PPP

Options Dialog Box.

This dialog box is used to set parameters relating to PPP’s internal operation.

You will probably never need to change the settings in this dialog box.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 312 313

Pas de commentaire

Compatible-systems 5.4 Manuel d'utilisateur Page 179