Compatible Systems MicroRouter 900i Guide d'installation télécharger pdf (Page 5)

Introduction to the DS3-10/100 RIOP 1

Introduction to the DS3-10/100 RIOP

The DS3-10/100 Routing Input/Output Processor (RIOP), as part of the VSR multigigabit

switching router, allows you to connect a local Ethernet and remote corporate network. The

DS3 interface has a data capacity of 44.736 Mbps, while the Ethernet interface can operate at

either 10 Mbps or 100 Mbps.

This section of the manual contains information specific to the DS3-10/100 RIOP. It is divided

into the following sections:

Chapter 1: Network Installation

Here you will find step-by-step instructions on how to physically install the DS3-10/100 and

connect it to your network.

Chapter 2: Quickstart Configuration

The Quickstart section provides a basic list of parameters that must be entered into the

DS3-10/100 for proper operation.

Chapter 3: Shipping Defaults

This section of the manual lists factory defaults for each interface.

Chapter 4: LED Patterns

This section of the manual describes the LED indicators for the DS3-10/100.

1 2 3 4 5 6 7 8 9 10 ... 17 18

Pas de commentaire

Compatible Systems MicroRouter 900i Guide d'installation Page 5